{"id":247,"date":"2012-12-25T20:01:38","date_gmt":"2012-12-25T20:01:38","guid":{"rendered":"http:\/\/userblogs.ganoksin.com\/tahiradesigns\/?p=247"},"modified":"2012-12-27T16:55:52","modified_gmt":"2012-12-27T16:55:52","slug":"custom-bulletin-board","status":"publish","type":"post","link":"https:\/\/userblogs.ganoksin.com\/tahiradesigns\/custom-bulletin-board\/","title":{"rendered":"Custom Bulletin Board"},"content":{"rendered":"

I took the roll of cork and a piece of plywood, some ribbon, and then in no time, I had a bulletin board that fit my d\u00e9cor.<\/p>\n

$\"\"$ <\/p>\n

All you need is the roll of cork, plywood, utility knife, spray adhesive, glue gun, and picture hangers.<\/p>\n

For some extra padding, I put a piece of cardboard behind the cork.<\/p>\n

Step 1:\u00a0 Measure and cut the cardboard to the size of the plywood (not the cork). Apply spray adhesive to both the cardboard and plywood. Simply line them up and press down.<\/p>\n

$\"\"$ <\/p>\n

Step 2:\u00a0 Apply the spray adhesive to the cork (mine was rolled tights, so I had to let it sit overnight unrolled under some heavy books).<\/p>\n

$\"\"$ <\/p>\n

Step 3: Center the cork over the cardboard covered plywood and press down firmly.<\/p>\n

Step 4:\u00a0 I bought some ribbon that I liked, and with a little hot glue, I applied it to the edge to cover the raw pieces of the cardboard and wood. Besides, it makes it look nicer.<\/p>\n

$\"\"$ <\/p>\n

Step 5:\u00a0 Attach the hangers. I chose these for no particular reason, they were just what I had.<\/p>\n

$\"photo1\"$ <\/a><\/p>\n

Step 6:\u00a0 Hang and enjoy!<\/p>\n

$\"photo2\"$ <\/a><\/p>\n","protected":false},"excerpt":{"rendered":"