Skip to content

Evolution of the Solitaire Engagement Ring

I-22723

Classic Six Prong Solitaire by Tiffany & Co., I-22723

When you mention engagement ring, most of us think of a simple band with a single diamond, shining and sparkling with love and promise. This is known in the jewelry trade as a solitaire engagement ring. The development of today’s solitaire rings really began in the late 1800’s when several new technologies brought jewelers the means to experiment with fresh ideas and expressions of this most simple of rings.

The style of solitaire was popularized in 1886 by Tiffany & Co, when they introduced the classic six prong setting shown above. This early solitaire featured a single diamond held up to the light supported by six prongs.Their primary innovation was the use of six prongs in a light weight open mounting.

At the time, most fine jewelry was fabricated from sheet and wire. The Tiffany goldsmiths started by forming sheet gold into a small cone, cutting off the pointed end, then sawing,carving and filing the piece into the form we see here. By cutting 6 equal and deep V notches down from the wide end of the cone, then making 6 shallow V‘ s up from the bottom, they were able to create the graceful “Tiffany” setting which was then soldered on to the ring shank.

Note – The actual setting that holds the diamond is now known in the trade as a “head” or “crown”, while the part that goes around the finger is known as a “shank.”

I-22723 detail b
Modern Cast Tiffany Setting, I-22723

This Art Nouveau solitaire features a more elaborately carved white gold head set onto a styled band.

I-19219 detail
Fabricated Art Nouveau ring, I -19219

The jewelers around the turn of the century made solitaires like this Edwardian ring, when platinum was all the rage. The yellow gold ring shank was overlaid with a thin layer of platinum hand engraved with a graceful design. This jeweler used a 6 prong head similar to the earlier Tiffany style to set the diamond.

14K & Platinum Edwardian Ring
Fabricated 14K & Platinum Ring, I-22726

During the late 1800’s and early 1900’s, the Industrial Revolution brought die striking technology to the jewelry industry in a big way. A two part steel tool known as a die and hub was used to stamp and form a design onto a sheet of precious metal. Steel rollers were also hand engraved with designs that could then be embossed onto a precious metal wire. Often, two die struck halves were soldered together to make a lightweight yet strong hollow form like this delicate Art Deco solitaire. The larger look of the design allowed using a smaller stone while creating a real presence at an affordable price.

Die Struck Art Deco Filigree Ring, I-22701
Die Struck Art Deco Filigree Ring, I-22701

The styles of Art Nouveau-Art Deco era included domed shapes like this die-struck solitaire. The basic form was create, then pierced and engraved by hand into the filigree style.

Die Struck Art Deco Dome Shape, I-21796
Die Struck Art Deco Dome Shape, I-21796

Other goldsmiths still preferred to execute their designs by fabricating them from sheet and wire parts, like this dramatic hexagonal Art Deco solitaire with typical repetitive geometric elements.

Fabricated Art Deco Ring, I-22270
Fabricated Art Deco Ring, I-22270

Precision lost wax casting developed in the early 20th century by the dental profession revolutionized modern jewelry making. Casting allows the jeweler to make multiple copies of a design without the expense of a costly steel die and hub. It also allows greater flexibility in the geometry and form of jewelry. These three modern designer solitaires show curved prongs that cross over each other, as well as variations of shank width and shape.

Cast Solitaire with cross over prongs, I-21941
Cast Solitaire with cross-over prongs, I-21941
Cast Solitaire with Cross over prongs and wide shank, I-16350
Cast Solitaire with cross-over prongs and wide shank, I-16350
Cast solitaire with high shoulders and narrow shank, I-13879
Cast Solitaire with high shoulders and narrow shank, I-13879

Modern period solitaires have generally returned to a simpler look, a single stone on a simple band. These two cast solitaires show the difference between high polish or decoration with hand engraving– giving our brides the choice between a bright modern look or a beautifully detailed vintage style.

I-22703 detail
Cast Platinum Solitaire by Cartier, I-22703
Cast and Hand Engraved Ring, I-21589
Cast and Hand Engraved Ring by Varna, I-21589

This grand and bold solitaire of hand engraved platinum decorated with 18K yellow gold filigree combines casting, fabrication and hand engraving.

Cast and Fabricated Platinum and 18K Gold Solitaire, I-21599
Cast and Fabricated Platinum and 18K Gold Solitaire by Varna, I-21599

This popular design features a die struck head made from 3 flat stamped parts, slotted so they fit together into a round configuration. Because the parts are mass produced, this style is one of the least expensive solitaires. This type of setting is often referred to as a “Tiffany” setting.

Die Struck 6 Prong Setting, I-22620
Die Struck White Gold 6 Prong Setting, I-22620

This type of head is available in both 6 and 4 prong configurations and can be set with white or yellow gold die struck or cast shanks. Note how the notched shank fits snugly into the sides of the head.

4 Prong Die Struck Platinum Solitaire, I-22140
4 Prong Die Struck Platinum Solitaire, I-22140
Two Tone Die Struck Solitaire, I-22560
White and Yellow Gold Die Struck Solitaire, I-22560

Today’s brides often prefer diamond shapes other than round. Modern cutting technology has brought us innovative new cuts and shapes. The square or rectangular shapes such as the Princess, Radiant, Emerald, and Asscher cuts are especially popular. This solitaire by Tiffany features a beautiful Radiant cut.

Solitaire by Tiffany with Radiant Cut Diamond, I-22311
Solitaire by Tiffany with Radiant Cut Diamond, I-22311

Many brides now choose colored gems over diamonds as a way to express their individuality. Mardon made this beautiful custom solitaire to show off an exquisite natural Padparadscha sapphire. Computer Aided Design (CAD) helped us create a wonderful piece efficiently while allowing our client creative input in the design process– a truly special experience for a young couple just starting out.

Padparadscha in Custom Rose & White Gold Solitaire
Padparadscha in Custom Rose & White Gold Solitaire

The modern solitaire has truly matured over the last century, propelled by technology, creativity, and innovation. Couples now can choose between more styles, decorative treatments, unique diamond and gems. We at Mardon pride ourselves in offering the latest choices and options to our clientele. Give us a call or stop by the shop– we offer a full range of wedding jewelry, including genuine vintage, designer, or custom rings.

 

 

 

 

 

 

james l. sweaney cga fga. gg

james l. sweaney cga fga. gg

james l. sweaney cga fga. gg

Latest posts by james l. sweaney cga fga. gg (see all)

Post a Comment

Your email is never published nor shared. Required fields are marked *
*
*